STAINED GLASS MACHINE "DRAGONFLY"
MASS PRODUCTION OF STAINED GLASS
Up to 480 p.m. / hour production speed
Glass and film cutting function
From 1 to 4 stained glass heads installation
2 year warranty for all parts of the stained glass maschine
Sheet glass contouring
Contouring a flex surface
Installation 1, 2 or 4 heads
Big operating area
1700 х 2800 mm
The welded construction provides stiffness
the bed is made of welded steel struts protected by anti-corrosion and color enamel paint.
Up to 8 m/min, follow-up accuracy up to 0,1 mm
Offered as an option
Installation of a head for cutting glass and film
Contouring a radial glass
Elatech Belt Drives, Apex Dynamics Rack Gear, HIWIN Guides, toothed-wheel pump England
VIDEO OF THE DRAGONFLY PROCESSING
MACHINE TECHNICAL CHARACTERISTICS
|Technical specifications||DRAGONFLY DM 1728||DRAGONFLY DM 1728Z||DRAGONFLY DM 1728-2 PROFI|
|Operating area||1700х2800 mm||1700х2800 mm||1400х2800 mm|
|Glass cutting head||-||+||-|
|Film cutting head||-||+||-|
|Contouring a flex surface||-||+||-|
|Setting 2 and extra stained glass head||-||-||+|
|Drawing contour speed, m/min||Up to 8 m/min||Up to 8 m/min||Up to 8 m/min|
|Cutting glass and film speed, m/min||Up to 24 m/min||Up to 24 m/min||Up to 24 m/min|
|Positional accuracy||0,2 mm||0,2 mm||0,2 мм|
|Follow-up accuracy||0,2 mm||0,2 mm||0,2 мм|
|X axis drive||Rack and pinion||Rack and pinion||Rack and pinion|
|Y axis drive||Belt||Belt||Belt|
|Z axis drive||Belt||Actuator||Belt|
|Power supply, volt||220 V||220 V||220 V|
|Wattage, watts||1500 W||1500 W||1500 W|
|Surface overall machine dimension||1900х3100х1300 mm||1900х3100х1300 mm||1900х3100х1300 mm|
|Packing dimensions of machines||2300х3500х1350 mm||2300х3500х1350 mm||2300х3500х1350 mm|
|Net weight||800 kg||800 kg||800 kg|
|Total weight||900 kg||900 kg||900 kg|
HOW IS STAINED GLASS CREATED?
First, you need to develop a sketch in any vector editor. Use any vector editor that immediately reads the area of the image and calculates the consumption of materials.
The preferred and edited image must be loaded into the editor, and then using the tools to outline the sketch.
The scale of the picture can be changed, cut, and also colored to see how it will look in the finished version.
The final drawing should to be saved in the format of the HPGL machine.
Apply a polymer contour with a CNC machine. Vary its height and width as needed. This can be done both during setup and during work. It is also possible to apply and sufficiently small details of the picture. Allow the contour to dry before the next step. The image becomes finally stabile within a few days, but 24 hours will be enough to continue the work.
The further work will require a flat, horizontal surface. Polymers are very fluid and it is important to prevent slipping to one side. The table, on request, can be made by yourself. Better perception of the ready-made product and colours can be achieved if the surface is equipped with the booster-light.
At the fifth stage, we fill in the dried out intercontour space. Use a two-component transparent base. Using special formulas, add small amounts of pigments to obtain the desired shades. This allows to change the colours and their saturation. In the same way, achieve the effect of a smooth transition from one color to another. The surface tension of the fill dries like a lens, creating a lifelike stained glass effect